||710 x 480
|Max. cutting dimension (mm)
||690 x 450
|Max. positive depth (mm)
|Max. negative depth (mm)
|Max. sheet width (mm)
|Clamping force (kN)
|Upper heating, installed power (Kw)
||83 (full opt)
|Lower heating, installed power (Kw)
||66 (full opt)
|Dry cycles speed (cicles/1’)
|Processing air pressure (bar)
|Max. reel diameter (mm)
|Total installed power (full opt – Kw)
|Weight (stacker excluded – Kg)
– Synchronized forming and cutting by tilting movable lower platen to 85 degrees
– Sheet ; pitched by double toothed chains and move on abrasion resistant slide plates;
– Precise heater control for upper and lower pan.
– Upper and lower Mold ; heats control by indivudial Thermoregulation device
– Fine adjustment for mold by electric drive.
– PLC for control the line operation and to supervise working parameters
– Non-stop working capacity with easy maintain mechanical system.
– Safety system ensured by sensors such as sheet sagging , pressure drop,door ajar situations
– Water and Heat balance measure sensors for mold which can be control by PLC system
– Energy analyzer which gives amount of the electric consumption
– Cutting adjustment possible by digital meter ,controlled by PLC.
– Plug asist motor and plug speeds all controlling by PLC suitable to put variotions of movement to plugs to plugs,start slow go fast end slow etc